Term
What three things make up the Hurst Power Unit? |
|
Definition
|
|
Term
What are the components to the power unit engine? |
|
Definition
- Briggs ans Stratton 4 or 5 h.p.
- 4 cycle
- air cooled
|
|
|
Term
What are the components to the power unit hydraulic pump? |
|
Definition
- positive displacement
- made by HALE
- rated at 10,000 PSI
- Delivers operating pressure of 5,000 PSI
|
|
|
Term
The cage is designed to carry and protect the power unit, hydraulic pump and reservoir. It is made of stainless steel tubing approximately ________ inches in diameter. |
|
Definition
|
|
Term
The average total weight of the power unit is _________ pounds. |
|
Definition
|
|
Term
The pump draws hydraulic fluid from a reservoir with a capacity of ________ quarts. |
|
Definition
|
|
Term
The Spreader unit is operated by one member with a thumb control valve called a _____ switch. |
|
Definition
|
|
Term
The spreaders have a opening force of ________ at the tips and a closing force of _________. |
|
Definition
- 18,000 pounds
- 18,800 pounds
|
|
|
Term
The opening and closing time of the spreaders is _________ without a load. |
|
Definition
|
|
Term
The maximum opeing distance between the spreaders tips is ______? |
|
Definition
|
|
Term
The total weight of the spreaders is ? |
|
Definition
|
|
Term
The cutting unit model JL-150 has a cutting force of __________ at the blades center . |
|
Definition
|
|
Term
At the base of the cutter blades is a "cable cutter" with a cutting force of ________? |
|
Definition
|
|
Term
The cutter has a maximum opening travel of _______ inches? |
|
Definition
|
|
Term
The cutter has a total weight of? |
|
Definition
|
|
Term
How many sizes are there for the Hurst Ram set and what are they? |
|
Definition
|
|
Term
The hurst rescue tool is provided with THREE sections of high presure hose. Each section is ______ ft long and rated at _______. |
|
Definition
|
|
Term
What is the proper spark plug gap on the power unit? |
|
Definition
|
|
Term
How do you clean the air filter? |
|
Definition
Paper filter is cleaned by brushing or tapping on a firm surface to remove dirt or debris Foam filter is washe with soapy water, air dried and resoaked with 30 weight oil. |
|
|
Term
The appropiate oil is 30 weight oil and needs to be changed every _______ to _____ hours of use. |
|
Definition
|
|
Term
When do you inspect the high pressure hoses? |
|
Definition
Check weekly and after use. |
|
|