Term
CRD & Hyd
Describe the purpose of hydraulics. |
|
Definition
-Provide high press water from condensate or CST for rod movement. -Charge accumulators. -Supply cooling water to drives. -Supply water to recirc pump seals and reference leg backfill. -Emergency supplies RPV w/feedwater or alt boron inject. |
|
|
Term
CRD & Hyd
Describe the CRD pump power supplies and cooling. |
|
Definition
-4kV from 15 and 16 bus. -Thrust bearing and gearbox oil cooled by RBCCW. |
|
|
Term
CRD & Hyd
Describe the CRD pump alarms. |
|
Definition
-12" Hg vacuum suction. -4kV breaker open. -Over current and high vibes 0.6g. -Speed increasing gear for motor from 1770 to 4210 rpm. |
|
|
Term
CRD & Hyd
Describe the suction filters in CRD system. |
|
Definition
-Suction (2) -5 micron. -High d/p at 10"Hg psid. -Bypass filters at 8"Hg vacuum (no alarm). -12"Hg vacuum pump trip with 2 sec time delay immediate alarm. |
|
|
Term
CRD & Hyd
Describe the discharge filters in CRD. |
|
Definition
-(2) 20 micron, -High d/p alarm at 20psid. |
|
|
Term
CRD & Hyd
Describe the flow path/rate for the min flow line. |
|
Definition
|
|
Term
CRD & Hyd
Describe the flow path/rate for the bypass line. |
|
Definition
|
|
Term
CRD & Hyd
Describe the charging water header pressure and flow path. |
|
Definition
1500psi CRD water to HCU accumulators. |
|
|
Term
CRD & Hyd
Describe the function of the drive water header. |
|
Definition
-Provide motive force for normal insertion/withdrawal of rods using d/p of 265psid over Rx pressure. |
|
|
Term
CRD & Hyd
Describe the function of the cooling water header. |
|
Definition
Provides cooling water flow path from CRD pumps to HCUs usual d/p is 15-33 psid over Rx pressure. |
|
|
Term
CRD & Hyd
Describe the flow control valve power supply. |
|
Definition
|
|
Term
CRD & Hyd
Describe the ARI solenoid valve power supplies. |
|
Definition
|
|
Term
CRD & Hyd
Describe the solenoid pilot valves power supplies. |
|
Definition
|
|
Term
CRD & Hyd
Describe the effects on the flow transmitter on a loss of Y-30. |
|
Definition
-Loss of Y-30 gives false low. -Causes flow control valves to go full open. |
|
|
Term
CRD & Hyd
Descripe the rated oil pump flow. |
|
Definition
|
|
Term
CRD & Hyd
Describe the 7 risers for HCU. |
|
Definition
-Drive insert. -Cooling water. -Exhaust water. -SCRAM discharge. -Drive water. -Charging water. -Drive withdraw. |
|
|
Term
CRD & Hyd
Describe the air header pressure to ensure faster SCRAM. |
|
Definition
70psig ensures faster venting on scram. |
|
|
Term
CRD & Hyd
Describe the low pressure setpoint for accumulators. |
|
Definition
|
|
Term
CRD & Hyd
Describe the high water setpoint for the accumulators. |
|
Definition
-40ML. -Red light = alarm. -Push button: if light goes off = high water. |
|
|
Term
CRD & Hyd
Describe the speed control valves settings. |
|
Definition
Speed adjusted to 3"/sec or 48secs +/- 9.6secs for full travel. |
|
|
Term
CRD & Hyd
Describe the SCRAM volume and setpoint for rod block. |
|
Definition
-1 gallon per rod. -54 gallons in discharge volume get SCRAM. -38 gallon in discharge volume get rod block. -28 gallon in discharge volume get alarm. |
|
|
Term
CRD & Hyd
Describe the charging header pressure setpoint. |
|
Definition
|
|
Term
CRD & Hyd
Describe the actions upon a 2nd accumulator low pressure alarm. |
|
Definition
|
|
Term
CRD & Hyd
Describe the CRD pump hi vibration setpint. |
|
Definition
|
|
Term
CRD & Hyd
Describe the CRD discharge water filter hi d/p setpoint. |
|
Definition
|
|
Term
CRD & Hyd
Describe the CRD pump suction press lo setpoint. |
|
Definition
|
|
Term
CRD & Hyd
Describe the charging water lo press setpoint. |
|
Definition
|
|
Term
CRD & Hyd
Describe the SCRAM pilot header hi/lo press setpoints. |
|
Definition
|
|
Term
CRD & Hyd
Describe when the disch vol tank not drained alarm actuates. |
|
Definition
|
|
Term
CRD & Hyd
Describe when the CRD hi temp alarm actuates. |
|
Definition
|
|
Term
CRD & Hyd
Describe the CRD suction filter high d/p setpoint. |
|
Definition
|
|
Term
CRD & Hyd
Describe the instrument air header low pressure setpoint. |
|
Definition
|
|