Term
Name safety consernes and practices for Airframes "moveable surfaces". |
|
Definition
landing gear and arresting gear can pose danger to personnel and equipment. Safety observers shall be in place to ensure that the surface will not come in contact with any person/object in its full range of motion. |
|
|
Term
Airframes Theory and primary mission |
|
Definition
The E-2C aircraft is a high-wing, all-weather carrier-and shore—based Airborne Early Warning Intercept Control (AEW/IC) monoplane, powered by twin turboprop engines. |
|
|
Term
The design of the aircraft permits what? |
|
Definition
operation from all angled deck carriers. |
|
|
Term
The most distinguishing feature of the aircraft is? |
|
Definition
a 24-foot, rotating, disk-shaped rotodome mounted on a pylon and located on top of the fuselage. |
|
|
Term
The aircraft construction is? |
|
Definition
semimonocoque, with full cantilever wings, horizontal stabilizer, and fins. Aluminum alloy is the principal structural material employed throughout the aircraft. In addition, extensive use is made of reinforced fiberglass cloth and fiberglass and aluminum alloy honeycomb sandwich structures. |
|
|
Term
The wing group includes what parts? |
|
Definition
the wing center section and the wing outer panels. The wing center section, which is mounted on top of the fuselage. Attachment points are provided for the fuselage, engine mounts, nacelles, wing outer panels, and inboard flaps. The main structural components of the wing outer panel are three beams, ribs, stringers, and skins. Wing hinges, wing lock fittings, and attachment fittings are provided for the outboard flaps and ailerons. |
|
|
Term
The tail group consists of what componites? |
|
Definition
a horizontal stabilizer, right inboard fin, left inboard slab fin, and upper and lower, left and right outboard fins. |
|
|
Term
Nose gear is located where? |
|
Definition
Forward section of aircraft, under Cockpit. Nose gear consists of 2 nose wheels and tires. |
|
|
Term
Name the four main fuselage sections and the other three sections that are considered part of the body section. |
|
Definition
the forward section, two midsections, and the aft section. The nose cap, rotodome, and pylon are also part of the body group. |
|
|
Term
The fuselage is of semimonocoque design and is fabricated essentially of_________ alloy. |
|
Definition
|
|
Term
The nose gear catapult system provides the aircraft with ____ _____ ___-___ capabilities through the use of a ____ ___ and associated ______. |
|
Definition
The nose gear catapult system provides the aircraft with carrier deck take-off capabilities through the use of a tow link and associated linkage. |
|
|
Term
The deicing system is _________ operated and _________ controlled. |
|
Definition
Pneumatically operated and electrically controlled. |
|
|
Term
The deicer boots are designed to remove what and are located on what parts of the plane? |
|
Definition
It removes accumulated ice from the leading edges of the wings, stabilizers, and vertical fins by inflating and deflating deicer boots bonded to the leading edges. |
|
|