Shared Flashcard Set

Details

kinetics and reaction engineering exam 2
Looks at definitions and terms for PFR, CSTR, mixed systems for ChE320 at umass
15
Chemical Engineering
Undergraduate 3
11/06/2014

Additional Chemical Engineering Flashcards

 


 

Cards

Term
Define Plug Flow Reactor
Definition
A plug flow reactor is a continuous reactor in which a 'plug' of fluid moves along a pipe with no axial mixing and perfect radial mixing
Term
Define: Continuously Stirred Tank Reactor
Definition
A CSTR is a batch type reactor in which all contents of the reactor are assumed to be evenly mixed
Term
Define kinetic Model (r)
Definition
An equation or set of equations used to describe the rate at which a reaction occurs
Term
Define: Reactor model
Definition
an equation or set of equations used to describe the ideal reaction conditions including space time, volume, flow rate, conversion, etc.
Term
Heat of ReactionΔHR
Definition
The amount of nrg, in the form of heat, that must be added or removed during a chemical reaction to all the reactions to proceed
Term
Overall heat transfer co-efficent, U
Definition
Ratio of the flux of heat transfer to the driving force behind the transfer (ie the temp difference)
Term
Adiabatic temp T
Definition
the max temp acheivable in an adiabatic system
Term
Parameter, δA:
Definition
Fractional volume change- δA=(VXA=1-VXA=0)/VXA=0
Term
Recycle reactor
Definition
reactor that recycles a protion of the effluent obtained at the outlet of the reactor back to the inlet
Term
Define Yeild:
Definition

Amount of product obtained relatice to the initial amount of reactant

 

Yield=((1/VP)Npf)/((1/Vr)Nri

 

Where Npf is the final moles of product and Nri is the initial moles of reactant and Vp and Vr are the stoichiometric coefficients

Term
Define Selectivity
Definition

Amount of product obtained relative to how much was reacted

 

((1/VP)Npf))/((1/Vr)(Nri-Nrf))

Term
Conversion
Definition

The proportion of material that that react

XA = 1-CA/CAO 

 
Term
What assumptions can you make about a CSTR reactor model?
Definition

You can assume that a CSTR is 

run at steady state with continuous flow of reactants and products; the feed assumes a uniform 

composition throughout the reactor, exit stream has the same composition as in the tank

Term
What assumptions can you make about a PFR reactor model?
Definition

? You can assume steady state, 

constant density, constant tube diameter, a single reaction is occurring. 

 
Supporting users have an ad free experience!