Shared Flashcard Set

Details

Pwrplant propellers
FAA prepware for oral & practical test
18
Other
Not Applicable
05/20/2014

Additional Other Flashcards

 


 

Cards

Term
POWERPLANT PROPELLERS

What type of device is used on propeller blades to remove ice that has formed on them?
Definition
Electrically heated deicer boots.
Term
POWERPLANT PROPELLERS

What is used to prevent ice forming on a propeller blade?
Definition
A mixture of ethylene glycol and isopropyl alcohol slung out along the blades.
Term
POWERPLANT PROPELLERS

Should an adjustable-pitch propeller be in high pitch or in low pitch for takeoff?
Definition
In low pitch.
Term
POWERPLANT PROPELLERS

What is done to cause a Hydromatic propeller to feather?
Definition
High-pressure engine oil is directed into the propeller through the governor.
Term
POWERPLANT PROPELLERS

What is done to cause a McCauley propeller to feather?
Definition
Oil is allowed to drain out of the propeller.
Term
POWERPLANT PROPELLERS

Does centrifugal twisting moment on a propeller blade tend to move the blades toward high pitch or toward low pitch?
Definition
Toward low pitch.
Term
POWERPLANT PROPELLERS

Do the counterweights on a propeller tend to move the blades toward high pitch or toward low pitch?
Definition
Toward high pitch.
Term
POWERPLANT PROPELLERS

What is the difference between a controllable propeller and a constant-speed propeller?
Definition
Basically, it is the control system. A controllable-pitch propeller uses a manually operated oil valve to control the pitch, and a constant-speed propeller uses a governor to control the valve.
Term
POWERPLANT PROPELLERS

When making a magneto check on an engine equipped with a constant-speed propeller, should the propeller control be in the low-pitch or the high-pitch position?
Definition
It should be in the low-pitch position.
Term
POWERPLANT PROPELLERS

What can be done to prevent the front cone from bottoming when installing a propeller on a splined shaft?
Definition
Install a spacer behind the rear cone to move the propeller forward on the shaft.
Term
POWERPLANT PROPELLERS

What is the purpose of the small holes that are drilled in the end of a wooden propeller?
Definition
These holes vent the inside of the propeller blade and allow moisture that collects in the wood to be released.
Term
POWERPLANT PROPELLERS

What is the function of the snap ring inside the hub of a propeller that is mounted on a tapered or splined shaft?
Definition
The snap ring allows the propeller to be pulled off of the shaft when the retaining nut is backed off.
Term
POWERPLANT PROPELLERS

What is adjusted inside the governor for a constant-speed propeller to change the speed at which the propeller is operating?
Definition
The compression of the speeder spring.
Term
POWERPLANT PROPELLERS

What is the function of the accumulator that is used with some McCauley feathering propellers?
Definition
The accumulator stores oil under pressure when the engine is operating normally. This oil is used to help the propeller blades move toward low pitch when the propeller is being unfeathered.
Term
POWERPLANT PROPELLERS

What is meant by the beta range of operation of a turboprop propeller?
Definition
This is the mode of ground operation, and it includes starting, taxiing, and ground reverse operation.
Term
POWERPLANT PROPELLERS

What is meant by the alpha range of operation of a turboprop propeller?
Definition
This is the mode of ground operation, and it includes starting, taxiing, and ground reverse operation.
Term
POWERPLANT PROPELLERS

Is the flat surface of a propeller blade the face of the blade or the back of the blade?
Definition
It is the face of the blade.
Term
POWERPLANT PROPELLERS

What keeps a McCauley feathering propeller from feathering when the engine is shutdown on the ground?
Definition
A spring-loaded latch mechanism prevents the blades moving into the feather position when the engine is shut down on the ground. In the air, aerodynamic forces keep the propeller rotating, and centrifugal force holds the blades unlatched so they can move to the feather position when oil pressure is taken out of the propeller.
Supporting users have an ad free experience!