Term
|
Definition
-Top button on the Front Panel.
-Attenuates input signals by 26dB's.
-Pressing it down turns it on. |
|
|
Term
|
Definition
-Knob used to adjust sensitivity.
-Adjustable Range is -16dB to -60dB when Pad Switch is off.
-Adjustable Range is +10dB to -34dB when Pad Switch is on. |
|
|
Term
| Zero Phase Switch (0 with a line marked through) |
|
Definition
-Reverses phase of input signals.
-Pressed down, reverses phase. |
|
|
Term
|
Definition
-Cuts frequency range below 80Hz with slope of 12dB.
-Pressed down, turns the high pass filter on. |
|
|
Term
|
Definition
| Lights up when level of signals pass EQ reaches 3 dB below clipping level |
|
|
Term
|
Definition
- (6) Green knobs on Front Panel.
-Arranged in High, Hi-Mid, Lo-Mid and Low frequencies
-Frequencies are variable.
*Controls timbre (side sound is coming from).
-Sounds like Old-Time radio
-Delegates quality of sound. |
|
|
Term
|
Definition
| -Turns on Equalization on and off. |
|
|
Term
| M1-M4 mix level controls (Gray Dials) |
|
Definition
| Route the post fader signals from input channel to MIX buses 1-4. |
|
|
Term
|
Definition
| Turns on and off signals routed from input channel to M1-4. |
|
|
Term
| **M5-M10 controls (blue dials) |
|
Definition
-Controls route of input channels to MIX 5-10.
-PRE switches select pre- or post- faders. |
|
|
Term
|
Definition
-Used to select pre- or post-fader for signals sent from the input channel to MIX 5-10.
-When on, pre-fader signals sent to MIX bus pair. |
|
|
Term
|
Definition
Used to set the stereo signal input channel Left and Right
(dictates signal style) |
|
|
Term
|
Definition
|
|
Term
|
Definition
-Turns on and off input channel.
-When off: no signal is sent to input channels 1-10.
-Using P(re)FL, enables you to monitor signals through jacks |
|
|
Term
| Pre Fader Listen switch (ONLY ON FRONT LEFT PANNEL) |
|
Definition
| -Signals of channel routed to PFL bus |
|
|
Term
|
Definition
-Adjust level of input signals
-Affects level of signals routed to ST buses 1-4 an 5-8 |
|
|
Term
MASTER SECTION
M1-M4 Buttons |
|
Definition
-Used to select level of signals sent from input channels to MIX 1-4
-Fix or Variable |
|
|
Term
MASTER SECTION
Fixed Select |
|
Definition
-Functions as a group
-Level of signal from each input channel will be adjusted
-M1-M4 mix level controls of input channels in MIX will be disabled. |
|
|
Term
MASTER SECTION
Variable Selection |
|
Definition
-Auxiliary bus function
-Passes through M1-M4 controls of input channels. |
|
|
Term
|
Definition
-Consist of output channels 1-10 signals individually.
-Signals that pass output channels are from 1-10 jacks
-Routed to AFL (after fader listen) bus
-1-4 routed to ST bus and Matrixes 1 and 2. |
|
|
Term
|
Definition
| -Control ST bus signals from peripheral jacks in rear. |
|
|
Term
STEREO SYSTEM (ST)
Post ST1 Button |
|
Definition
-Toggles between pre-and post-fader for signals out of ST2 jacks
-When signals are output from ST2 jacks
-when off, ST fader doesn't affect signals |
|
|
Term
|
Definition
|
|
Term
STEREO SECTION
MONO switch |
|
Definition
-Signals mixed into a monaural signal from ST2-OUT jacks
-Does not effect signals from ST2 out jacks. |
|
|
Term
STEREO SECTION
Level Control |
|
Definition
-Adjust output level of signals at ST2 OUT jacks
-Doesn't effect level of signals from ST1 OUT jacks. |
|
|
