Term
|
Definition
-Fractional Sets
-Metric Sets
-Numbered and Lettered Sets |
|
|
Term
| Twist Drill Bit Sharpening For Steel |
|
Definition
59 Degrees Point Angle
12 Degree Clearance Angle |
|
|
Term
| Nut and Bolt Thread Pitch Types |
|
Definition
-TPI (Threads Per Inch)
-Metric (Gap between Threads in MM) |
|
|
Term
|
Definition
Course Thread
Fine Thread |
|
|
Term
|
Definition
| Inner Diameter (ID) until pipes exceed 12" as of which they are measured based on OD (outer diameter) |
|
|
Term
| The best Tap to use is a: |
|
Definition
| Tapered Tap, this allows you to gently make the taper. |
|
|
Term
| When are the plug and bottoming tap used? |
|
Definition
The plug tap is used when you are unable to use a tapered tap.
The bottoming tap is the final tap you use to ensure proper size and quality. |
|
|
Term
| On a hacksaw, what way do you want the blade? |
|
Definition
| The blade's teeth are angled, you are going to want the teeth pointing away from you so that on the down stroke you will make the cut. (this may change when underwater, depending on weight.) |
|
|
Term
|
Definition
-Acme Thread
-Adjustable
-2, 3, and 4 jaw |
|
|
Term
|
Definition
-Acme Thread
-Many Sizes
-Used as a holding device |
|
|
Term
| Hand Pipe Threader Features: |
|
Definition
-exchangeable die heads
-ratcheting
-exchangeable die teeth |
|
|
Term
|
Definition
| used as a hold down to work on a pipe |
|
|
Term
|
Definition
-various wheels for which materials
-When using ensure that it is tight, spin around pipe, tighten and repeat. Should only take 10 times around. |
|
|
Term
|
Definition
-Spring benders will work on multiple sized tubing.
-Guided benders will only work on 1 size. |
|
|
Term
|
Definition
-regular and low clearance
-various wheels for which material |
|
|
Term
|
Definition
| It is a 90 degree elbow that is male to female. |
|
|
Term
| What extra pieces attach to a Chicago hose? |
|
Definition
| Safety Cables and a pin to lock. This is stop the hoses blowing around if disconnected. |
|
|
Term
|
Definition
Male QD - blows out when Disconnected.
Female QD - Shuts off when Disconnected.
Hydraulic QD's - Shutoff's on both ends. |
|
|
Term
| Oxygen Couplers do not need? |
|
Definition
| They do not need any sealing components such as tape,oils etc... |
|
|
Term
|
Definition
| Society of Automotive Engineers |
|
|
